Products

ALPHA .50 cal Suppressor
November 1, 2018
REVOLUTION BIPOD Lightweight Aluminum Model
December 7, 2018
Show all
Revolution Bipod Panning Model

REVOLUTION BIPOD Panning Model

Rated 4.00 out of 5 based on 1 customer rating
(1 customer review)

$575$665


ELITE IRON® REVOLUTION BIPOD® PANNING MODEL

ELITE IRON has been researching and developing alternatives to the traditional bipod for years and has patented their proprietary designs based upon deep experience of real world tactical demands. Our efforts have resulted in the new REVOLUTION BIPOD Panning Model Model. Designed for rifles up to .338 caliber, it is the most revolutionary choice in superior design for strength, stability, adjustability, and choices in the tactical world today.The bipod and mount weigh only 24 ounces. Every REVOLUTION BIPOD comes with a 2-year limited warranty. All parts are replaceable and available from ELITE IRON.

ELITE SHOOTERS TRUST ELITE IRON AND THE REVOLUTION BIPOD PANNING MODEL TO HELP MAKE THE TOUGHEST SHOTS. AND HERE’S WHY:

Elite Iron Panning Bipod

Elite Iron Panning Bipod

STRENGTH

1.   No exposed springs. No cheaply made stamped parts.

2.   Legs and tube stems are made of 7075 aluminum.

3.   Leg locks are made from 8620 high grade cold rolled steel.

4.   Hidden springs are made from 316 stainless steel.

STABILITY

5.   Rifle can revolve 3600

6.   Maintains control of 2 axes of motion: side to side and up and down.

7.   Any position can be locked in place by tightening torsion nut. Ease of movement decreases by tightening torsion nut slightly until final position is found and locked.

8.   REVOLUTION BIPOD places rifle under the apex of legs – NOT on top.

ADJUSTABILITY

9.   Length of legs adjusted quickly. One at a time and at different lengths.

10.  Legs positioned or rotated forward, straight or back – in parallel or separately.

11.  Center line of ring is 7.25” with legs retracted and 12.25” extended on Standard Leg Bipod.

12.  Center line of ring is 6.00” with legs retracted and 10.00” extended on Optional Short Leg Bipod.

13.  Attach different kinds of feet to match the environment.

CHOICE

Every REVOLUTION BIPOD comes with a choice of one free mount.   You will need to choose the right mount for your rifle and the interface (at an additional charge) that matches that mount.

However, if your rifle has a interface such as a PIC RAIL, a interface might not be needed.

Take the following 3 steps to order your REVOLUTION BIPOD PANNING MODEL

 STEP 1:  Your rifle’s PIC RAIL MOUNT OFFSET MUST BE MEASURED to select the correct MOUNT to match your rifle’s INTERFACE. If one of our standard mounts will not fit your rifle, a custom mount can be made for you by contacting ELITE IRON at 406-244-0234.

HOW TO MEASURE FOR PIC RAIL MOUNT OFFSET (Measurements must be in inches to the nearest thousandth.)

MEASUREMENT #1 from top of barrel to bottom of PIC RAIL MOUNT:

NOTE: Measurements must be included in “ORDER NOTES” in the CART to expedite processing of your order.

 

If 2.100” or less, select the below Standard Offset Mount.

STANDARD OFFSET EXTENDED PIC RAIL MOUNT

STANDARD OFFSET EXTENDED PIC RAIL MOUNT

If between 2.100” and 2.300”, select the below Medium Offset Mount.

MEDIUM OFFSET EXTENDED PIC RAIL MOUNT

MEDIUM OFFSET EXTENDED PIC RAIL MOUNT

If between 2.300” and 2.550”, select the below High Offset Mount.

HIGH OFFSET EXTENDED PIC RAIL MOUNT

HIGH OFFSET EXTENDED PIC RAIL MOUNT

If more than 2.550” from Measurement #1, a custom mount will be required.

MEASUREMENT #2 from the end of the PIC RAIL to the end of the stock:

If Measurement #2 is more than 0.500”, select the below SAKO TRG Mount.

SAKO TRG MOUNT

SAKO TRG MOUNT

Have a McRees, SCAR 17S,  Savage BA110, Accuracy International (Gen 1 A1 rifles) or similar Rifle?

You must select the below Quick Connect PIC RAIL Mount.

QUICK CONNECT PIC RAIL MOUNT

QUICK CONNECT PIC RAIL MOUNT

Note: QUICK CONNECT PIC RAIL MOUNT must be used with QUICK CONNECT INTERFACE

STEP 2:  SELECT YOUR REVOLUTION BIPOD PANNING MODEL INTERFACE

The Interface on your rifle should match your chosen Mount.

Remember, if your rifle has an existing interface, a interface might not be needed, you must select No Interface in the pull down.

Quick Connect McRees Scar17S Interface - $60

Quick Connect McRees Scar17S Interface – $60

Quick Connect Bedding Mount Interface – $65

Quick Connect Savage BA110 or similarI Interface

Quick Connect Savage BA110 or similarI Interface – $90

4 Accuracy Intl Gen1 A1 Spigot Interface

4 Accuracy Intl Gen1 A1 Spigot Interface – $100

STEP 3:  After you choose your Mount and Interface, select them from the pull down menus below to put them in the cart.

Have Another Rifle?

Additional mounts and interfaces to fit your other rifles are at additional cost.

To purchase a Mount and Interface for each additional different rifle to use with your Elite Iron Revolution Biopod you will need to go to the Mount-Interface page to put the Mount and Interface into the cart.

After you place this order into the cart, simply click this link to the Mount-Interface Page.

Clear
SKU: n/a. Category: . Tag: .
Description

 International orders must select International shipping at checkout. International shipments will be charged for shipping after order is ready to ship. Customers will be informed of shipping cost prior to shipping of products. If there are any questions please contact us at 406.244.0234

Reviews (1)

1 review for REVOLUTION BIPOD Panning Model

  1. Rated 4 out of 5

    Kevin (verified owner)

    Very solid, light weight, works well, only downside is legs extend almost too easily,

Add a review

Your email address will not be published. Required fields are marked *

Our Revolution Bipod product pages are currently under construction. If you would like to place and order for any of our Revolution Bipods please call our office at 406-244-0234 and we will be happy to help you place that order.

We apologize for the inconvenience and will have these pages back up and running soon.